View Full Version : Help!!!

02-28-2010, 09:28 PM
help i need to get my 3 wheeler up and running asap.

ok i have an 85' atc350x and it will not go into gear and with the motor shut off i pulled the clutch in and put it in 1st gear and see if the gear would disengage but it did not and the chain is way tight cause this have cause the problem?

02-28-2010, 11:49 PM
Hey honda kid...looks like yer on now....lets get some info.....& calm down a tad!
Have ya got resistance when you pull the clutch in???....I`ll walk w/ya for while..IF yer still on that is.................

03-01-2010, 01:03 AM
Check the clutch cable adjustment and make sure the clutch is fully disengaging . Is the shift lever stiff and not wanting to move ? If so , you may have trans problem

03-01-2010, 11:40 AM
it's very hard to pull the clutch in and the shift lever moves fine

03-01-2010, 07:17 PM
sounds like you may have to pull that clutch pack out

03-01-2010, 07:36 PM
crap i was hoping i woudn't have to do that but do you have a link or something that shows me everything inside the cover or can i just pull the cover off with no problem?

03-01-2010, 07:47 PM
The cover should just come off . You can go to the parts manual section and download or just look through it . Should be pretty strait forward.



03-04-2010, 11:49 PM
Hey hk, hows the clutch work/diagnosis comeing...D/L`n that man. would help! Just thought I`d ask!!!

03-05-2010, 12:33 AM
i haven't had time to tear into it yet but when i do i'll post pics of the clutch and y'all can tell me if it's bad in the mean time night y'all :sleep:

03-05-2010, 10:17 AM
Yeah, it's to darn cold out now!

03-07-2010, 11:25 PM
is there any instructions/tips to the whole disassembly/assembly to the clutch and everything if so where do i go to download and print them???

03-08-2010, 03:54 PM

Click on this link

03-11-2010, 01:00 PM
is there any place the i can get a new clutch for an 85' atc350x for under $80 i've looked on ebay but only see used ones

03-11-2010, 04:57 PM
http://cgi.ebay.com/ebaymotors/PRO-RACER-CLUTCH-KIT-HONDA-85-86-ATC350X-ATC-350X_W0QQitemZ380210295034QQcmdZViewItemQQptZMotor s_ATV_Parts_Accessories?hash=item58864cb0fa

Got this one Coming in today, About the cheapest i could find, Don't know how good of quality but unless you need just the plates or just the springs, (in the manual it will tell you how to check for wear) this is as cheep as i could find.

When I get mine in and put back together I will let you know How it works.

Probably a better quality one out there, Just More $$$

Good Luck