View Full Version : 200x engine diagram

03-21-2010, 10:51 PM
me and my brother in law are trying to put back together his 86' 200x atc. if anybody has an engine diagram for it... that would help a lot! the 200x is a 6 speed

03-22-2010, 09:02 AM
Hey, welcome!

All registered users on here can see the manuals, might be helpful for you.

Make an account and follow the confirmation email.

Then you should be good to go!

03-22-2010, 07:37 PM
Does anyone have an engine diagram for a 1984 honda 200x

03-22-2010, 07:39 PM
Check out this thread (http://honda350x.com/forum/showthread.php?t=68).

03-22-2010, 07:42 PM
Does anyone have an engine diagram for am 1984 honda 200x? Please help !

03-23-2010, 10:01 AM
Does anyone have an engine diagram for am 1984 honda 200x? Please help !

Have you looked at the thread I linked to?

There is a manual for downloading there bro.

Have a look at that, might be helpful!

03-23-2010, 08:07 PM
83-85 200X engine diagram:


03-23-2010, 08:34 PM
You the best GeoD! Are you single?


honda rulez
10-26-2010, 09:43 PM
I also am looking for an engine diagram an the nuts onthe fly wheel and clutch is a circle with four notches in it

11-02-2010, 12:25 AM
The flywheel on the 200x does not have a nut, it has a 12 or 14mm bolt holding it onto the crank. The clutch, and the oil pump, both have a special nut holding them on. You will either have to buy the special socket, or make your own. I believe it is a 24mm, so if you have a 24mm socket you can cut four sections out, leaving a 4 prong shaped tool, and wala.
If you dont have an impact wrench, you can use a penny to put betweeth the gears on the clutch and the oil pump to lock the motor up. The soft copper will bend before it hurts any of the teeth on the gears.

good luck.