PDA

View Full Version : Tri-moto ques.



kt60016
05-09-2010, 10:42 AM
OK the ques is my couisan (whitch i got him to like trikes) had a trike laying around whitch was a YTM 200e or a yamhauler so i took it home worked on it and got it going so i rode it for awhile and when the engine was cool it would sit and idle then when it was warm it would die if u let it have a chance and another thing is when you pop it up on two wheels when turning and keep it there for a few sounds it dies and blows blue smoke out and i was wondering should i tear in to it an check the piston on put new rings on it :confused:

GeoD
05-09-2010, 01:08 PM
Start with the carb first.

kt60016
05-09-2010, 02:07 PM
Yeah i started there took it off cleaned it and adjusted it but didn't make a lick of differance

kt60016
05-10-2010, 06:21 PM
Well my couisn wants to put a wisco 10:25:1 comp piston in it so after getting my 350X back to geither we will tear in to his

dom
05-10-2010, 08:18 PM
Blue smoke is always bad, but I wonder why more comes when you do a wheelie?

Maybe dumping more oil from the valves when in that position..

Who knows, keep us posted on the build.

kt60016
05-10-2010, 09:56 PM
Blue smoke is always bad, but I wonder why more comes when you do a wheelie?

Maybe dumping more oil from the valves when in that position..

Who knows, keep us posted on the build.

Its not from when you pop a wheelie but when pop one of your rear tires up and go in a circle but i dont know we will see when we tear into it